How to charge the DJI Mavic 2 Intelligent Flight Battery?

Charging the DJI Mavic 2 Intelligent Flight Battery is very simple.

Simply plug the large rectangular fitting into the back of the battery (you cannot charge the battery when it's attached to the aircraft. And turn on the power supply. The fitting will only go on one way because of a slightly cut off corner on the connectors.

You'll notice the green lights on the battery will flash in a circular motion. When the battery is full, all 4 lights will become solid and you can unplug the battery. Simply pull the connector to remove it.

Charging the DJI Mavic 2 Flight Controller

Charging the DJI Mavic 2 Flight controller is very simple, however the connectors can sometimes confuse people who aren't familiar with where they are and where they go.

On the Power Adaptor, the cable to charge the controller is tucked away down the side. it's a very tidy idea for storage, however, the length of the cable is actually very short.

Now let's find the port on the Flight Controller. On the left side of the flight controller is a short cable that you simply pull out which acts both as a data transfer cable between the controller and your smart device and a charging port.

What you will notice is both the connector you've just removed and the port itself is rectangular in shape and not beveled. The port is still Micro USB and the squared port will still accept a beveled connector. The first time you plug it in may seem quite fiddly, but it will go in.

When the connector is in you will see on the screen that the remote controller is charging. You can charge one Intelligent Flight Battery and the Mavic 2 remote Control at the same time. With the DJI Mavic 2 charging hub, you can charge up to 4 Intelligent Flight Batteries in sequence as well as one remote controller.